Quote:
Originally Posted by oldscooter
I could use some insight on the Mikuni. I see the main jet, the pilot jet, the bowl drain screw, and what I assume to be the idle adjustment on the right side. The adjustment screw in the recess on the bottom should be set at what? It looks to be the same as the pilot screw on my old VTX that fine turned the idle. So to start, set the idle screw on the side at 1 1/2 out. What about the bottom screw? It's 3/4 out now.
|
Guess is 1 1/2 , but only a guess . Or that's where I will start when mine arrives with a 120 main and a 30 pilot .
__________________
![](image.php?u=31912&type=sigpic&dateline=1486935029)
Living life to the fullest to avoid regrets later ,,,,or I am a complete loon ! Either way I am good