ChinaRiders Forums - View Single Post

Jay In Milpitas · 03-18-2017, 08:13 PM

Juan Carlos, your hose looks to go much different than ours does. Is this another difference in the Corven Triax 250?
http://www.cscmotorcycles.com/v/vspf...age_%20(1).jpg

As jct842 said, run the hose as loose and straight as you can. Change the position of the front clamp? Leave the front clamp off?

Edit: You posted just before I did. That looks much better. The white hose is usually a high grade plastic (HDPE or Teflon) and the steel braid is there to keep it from expanding under pressure. It is very much like the 6000 psi/41000 kPa hoses that I work with on heavy equipment.

03-18-2017, 08:13 PM	#6
Jay In Milpitas Join Date: Jul 2015 Location: Milpitas, CA. USA Posts: 775	Juan Carlos, your hose looks to go much different than ours does. Is this another difference in the Corven Triax 250? http://www.cscmotorcycles.com/v/vspf...age_%20(1).jpg As jct842 said, run the hose as loose and straight as you can. Change the position of the front clamp? Leave the front clamp off? Edit: You posted just before I did. That looks much better. The white hose is usually a high grade plastic (HDPE or Teflon) and the steel braid is there to keep it from expanding under pressure. It is very much like the 6000 psi/41000 kPa hoses that I work with on heavy equipment.
	0