Quote:
Originally Posted by Bill1
I rode the bike to work tonight, so I'll take the cover off again tomorrow and check to see how badly it scrubbed. There was some runout in the output shaft so hopefully it will not be as bad as I initially thought.
I will probably order a 16T sprocket anyway and maybe another rear in 42T.
|
in my case, the 17 and the 16 rubbed, to fix it i installed it backwards. see picture. if you don't do it like this, your chain will be massively out of alignment and there isn't a way to get your rear tire straight as it should be. i used locktite and i have 50 miles or so on it, its not loosening.
also, this isn't a warranty issue as with the stock sprocket and gearing and chain, everything clears and there is no rubbing, this is a design change.
