ChinaRiders Forums - View Single Post

Azhule · 11-05-2016, 05:18 PM

From what I can remember... On Detours RX3 : all the bolts were "properly tight, with nothing physically moving", but part of the Heat Shield itself was slightly touching the header towards "the front" of the bike.

Can't remember if he "shimmed" it away from the exhaust with a small washer or 2, or if it was a "bend the heat shield away" kind of job...

What I can remember is seeing it BARELY touching and causing a massive amount of racket for such a little part

11-05-2016, 05:18 PM	#6
Azhule Join Date: Dec 2015 Location: CO Posts: 1,525	From what I can remember... On Detours RX3 : all the bolts were "properly tight, with nothing physically moving", but part of the Heat Shield itself was slightly touching the header towards "the front" of the bike. Can't remember if he "shimmed" it away from the exhaust with a small washer or 2, or if it was a "bend the heat shield away" kind of job... What I can remember is seeing it BARELY touching and causing a massive amount of racket for such a little part __________________ "Think as you like... but this self proclaimed Professor is always right" - Buckshot "You never know what someone is hiding beneath their smile..." - NinjaTom - R.I.P.
	1