[fatboy250]

If I remember correctly Dad made an extension bit about 14-16" long at a 5/8" diameter. That got both the baffles with a straight shot from the pipe to the end of the exhaust. I think Flashby cut the end of his and gutted it then weld the end back on. That would ensure there is the least restriction with the stock pipe. Dad and I are pretty satisfied with the performance as is, so I doubt we'll be doing anything else. Both Dad and I have seen 80 on the speedo, but we know it reads about 5mph fast so 75mph. Before I don't think it would have gone 70mph with the stock pipe undrilled nor did it want to pull when going up hills and such.

Jason