ChinaRiders Forums - View Single Post

**cheesy** · 09-19-2016, 07:29 AM

Knowing what I do now, Bruce, it will be all new next time. This was just going to be a 'morning project' so it was done in my driveway, with just a new u-joint. The project was complete with Mechanic Delay Factor, or MDF, which is when your neighbor wanders over and asks '"Whatchadoin?".

I was thinking that some hardened metric eye bolts screwed into the bolt holes of the hub in conjunction with a slide hammer and three jaw puller might work to remove the hub. Your idea is better. Next time.

Seals and bearings are next on the rear axle and that will be done on a Saturday at the shop. Done it before on a different vehicle, so I have half a clue.

09-19-2016, 07:29 AM	#4
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,823	Knowing what I do now, Bruce, it will be all new next time. This was just going to be a 'morning project' so it was done in my driveway, with just a new u-joint. The project was complete with Mechanic Delay Factor, or MDF, which is when your neighbor wanders over and asks '"Whatchadoin?". I was thinking that some hardened metric eye bolts screwed into the bolt holes of the hub in conjunction with a slide hammer and three jaw puller might work to remove the hub. Your idea is better. Next time. Seals and bearings are next on the rear axle and that will be done on a Saturday at the shop. Done it before on a different vehicle, so I have half a clue. __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	1