Quote:
Originally Posted by Azhule
How much was it for each cable? I'm sure you are right around the cost of a ('cheap') Hydraulic setup already... and you would only have to change out a few cents worth of DOT4 or Mineral Oil every 2 or so years with a Hydraulic Clutch  |
around $8 a cable shipped from a us warehouse... i will probably piece my own clutch together as i want to match my custom brake lever....LOL and the el cheapo slaves are a bear to bleed....
Quote:
Originally Posted by 2LZ
Check your pivot hole in the handle where the cable end sits. Sounds like a burr not allowing the cable end to pivot. That was an early Victory issue. "The Dreaded Burr".
|
they break about an inch from the cable end in the lever... first thing i checked is that the ball can pivot.it may be hitting a ridge, but at this point, i have been wanting a hydro clutch anywho, because i have extra heavy clutch springs.... and i had a hydro on my old pocket bike.... man that was a beast....would do 67 mp[h gps confirmed.... race cam, vm26 carb, straight thru exhaust... pic for posterity...LOL
and a vid... sounded mean...