Quote:
Originally Posted by Ariel Red Hunter
Looking at your picture, it appears that the sprocket is bearing on the threaded end of the studs. If that is so, I'm not surprised they sheared off. The load must always bear on the unthreaded part of the studs. Find longer shanked studs, even if you have to use washers to get the nut tight.
|
Its very odd though, if you refer back to my previous pictures, my stock ones broke on the smooth stud side. The threads are fine, but I know what your saying.
http://www.chinariders.net/showthread.php?t=16797
It seems to be a specialty part... is there a common replacement?