Quote:
Originally Posted by jimwildman
I have a 30mm mikuni here somewhere, I havent taken the hawk out for any speed runs yet so i cant say what it will be like at speed but around the yard its doing fine.
if it goes lean ill dig through my bucket of mikuni's and grab all the jets i can find that will fit the 30mm and work through it.
|
What we've been calling a 30mm Mikuni is actually closer to 26mm. If you have a genuine 30mm, it will be too big for these little motors. The carbs we've been using are 30mm across the inlet, at the leading edge (not the bore near the slider).