ChinaRiders Forums - View Single Post - Adding brake lights with 4-wire turn signals

detours · 06-02-2016, 01:44 PM

Thanks Sprite! In order to wire up the extra running light and brake light on the new turn signals, I have to tap into the stock license plate light and brake light wires.

I could have just cut and spliced the wires together, but I like to keep things as close to stock as possible. So I ordered some 3-way bullet terminals to simplify installation.

http://www.ebay.com/itm/182128958020

06-02-2016, 01:44 PM	#12
detours Join Date: Sep 2014 Location: Arvada, CO Posts: 1,004	Thanks Sprite! In order to wire up the extra running light and brake light on the new turn signals, I have to tap into the stock license plate light and brake light wires. I could have just cut and spliced the wires together, but I like to keep things as close to stock as possible. So I ordered some 3-way bullet terminals to simplify installation. http://www.ebay.com/itm/182128958020 __________________ Red 5 standing by! 2015 CSC red RX3 with 19" front wheel, Shinko 804/805, skid plate, tall seat, 13T/45T sprockets, progressive shock, Winyoochanok windshield, GENSSI LED headlight, SW-Motech tankbag, Shorai Lithium battery 2014 Ural Patrol
	2