ChinaRiders Forums - View Single Post - Adding brake lights with 4-wire turn signals

detours · 05-31-2016, 12:40 AM

Now remove the main bolts of the tail assembly and the rear body panels.

Remove the top two bolts, above and to the rear of the electrical panel
Remove the top screws for the rear side body panels.
On the left rear body panel, remove the upper and lower screws.
Now remove the rear body panels. Some careful jiggling will release the tabs from the panels they are connected to.

05-31-2016, 12:40 AM	#3
detours Join Date: Sep 2014 Location: Arvada, CO Posts: 1,004	Step 2: Unbolt the tail assembly Now remove the main bolts of the tail assembly and the rear body panels. Remove the top two bolts, above and to the rear of the electrical panel Remove the top screws for the rear side body panels. On the left rear body panel, remove the upper and lower screws. Now remove the rear body panels. Some careful jiggling will release the tabs from the panels they are connected to. Attached Images __________________ Red 5 standing by! 2015 CSC red RX3 with 19" front wheel, Shinko 804/805, skid plate, tall seat, 13T/45T sprockets, progressive shock, Winyoochanok windshield, GENSSI LED headlight, SW-Motech tankbag, Shorai Lithium battery 2014 Ural Patrol Last edited by detours; 05-31-2016 at 01:43 AM.
	0