Quote:
Originally Posted by pyoungbl
Dan, thanks for that link to your write-up. It seems we are of a like mind with this 'letric stuff. After reading your account I'm still not sure where you got the switched power for your relay. Normally I'd go for something like the tail light. I just have not dug that deeply into the wiring harness yet. BTW, under that plastic tray and near the back of the cavity there is a blanked off electrical connector. This sucker looks like it has 8 or 10 leads going into one side, nothing on the other side. Any idea what this is for? It might be just what I need for switched power.
Peter Y.
|
Referring to the photo in my write-up:
The green oval is a fuse holder. The small black wire coming to the bottom is a switched +12V. I used this for the relay signal. I used a small Posi-Tap PTA2022
__________________
Dan
CSC RX3 Cyclone, CSC TT250, Moto Guzzi V7 II, KLR650
|