Quote:
Originally Posted by katflap
" Blow out spark plug hole with compressed air"
Spud, just wanted to say that this tip of yours is an absolute "must" and to add , make a really good visual inspection afterwards to make sure its all clear.
A while back when doing my plug, I had a couple bits of gravel jamed low down between the plug and the plug recess. you can guess where they were going to go if i hadn't spotted them prior to removing the plug.
|
Indeed, the spark plug hole is poorly designed, and it collects a lot of small rocks/debris.
I recommend using a flashlight and an inspection mirror, to make sure every bit of rock/debris is blown out of the hole.
http://www.harborfreight.com/telesco...rror-7361.html
__________________
Spud
"Never argue with an idiot. He will drag you down to his level, and beat you with experience."
Mark Twain
2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220
Mods made to my Zongshen ZS200GY-2:
http://www.chinariders.net/showthread.php?t=6894