ChinaRiders Forums - View Single Post

SpudRider · 04-11-2016, 06:19 AM

If you replace a worn bearing before it fractures, you can easily remove it. I prefer to drive out wheel bearings using a Motion Pro bearing driver and split collet. The bearings in the rear wheel of the RX3 can be removed using the following parts.

http://www.motionpro.com/motorcycle/partno/08-0260/

http://www.motionpro.com/motorcycle/partno/08-0268/

Just in case someone hasn't used this method to remove wheel bearings, here's how it works.

04-11-2016, 06:19 AM	#4
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	If you replace a worn bearing before it fractures, you can easily remove it. I prefer to drive out wheel bearings using a Motion Pro bearing driver and split collet. The bearings in the rear wheel of the RX3 can be removed using the following parts. http://www.motionpro.com/motorcycle/partno/08-0260/ http://www.motionpro.com/motorcycle/partno/08-0268/ Just in case someone hasn't used this method to remove wheel bearings, here's how it works. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0