Two setbacks
Two setbacks in this little adventure that have pushed my inspection/registration back another week.
Headlights
This machine uses HS1 35/35w bulbs but the more-common H4 bulbs are backwards compatible if they are 35/35w. I couldn't find any HS1 or any low-wattage H4 at auto parts stores or Wally World. They are available online from Amazon and elsewhere but won't arrive until tomorrow when my 4x10 workweek has started again.
I hadn't ordered them before because I didn't know if the bulbs were blown or if it was something else (switch? wiring?). I took the front cowl off yesterday and tested the power to the bulbs; good, and not overvolted. I pulled the bulbs and the filaments were broken.
While I was in there I checked the existing rectifier/regulator against a new spare I bought. Both gave the same output at idle and when revved so I think the OEM is still good. I left it in place.
Keys
I had tried calling around to check for the HS1/H4 bulbs but had more faith in my own eyeballs looking at the shelves. So I went on a little errand trip to a couple of nearby towns.
At some point in that trip I lost the scooter key. :-( I think I had it loose in my pocket and it got tangled up with something I pulled out. I ordered a replacement lockset ($25) and they are supposed to be easy to install but it's still frustrating.
__________________
Current: bikeless for now, moved into a campervan.
Past: 2012 Honda NC700x, 2014 Taotao ATM-50-A1, 2014 Taotao Evo, 19?? Honda Spree 50, 1982 Katana 550
|