Quote:
Originally Posted by SpudRider
If the first wiring experiment I detailed in post #73 doesn't work, try this configuration.
Connect the light green wire to the positive terminal of a power source, which can be a motorcycle battery, or even a 9V dry cell. Connect the black wire to one of the spade connectors on the horn. Finally, connect the other spade connector of the horn to the negative terminal of the power source. Then press the horn button, and see if it the horn works.  |
Ok the #73 does not work.
What do you mean the BLACK wire,
I understand the light green wire will go to the BLACK WIRE on battery Positive.
Then you say Connect the Black wire to the spade connector, is this the same wire that the light green wire is on or a different black wire?
Then the other spade of the horn to the Negative Terminal, Red Wire. But what about the Green Wire, that the harness came with. That green wire is not even in the SWITCH at all, its with the Light Green Wire.
This is the Horn I got.
http://www.ebay.ca/itm/12V-105db-Mot...dTW-Ii&vxp=mtr