Quote:
Originally Posted by SpudRider
If you will positively identify the wires connected to the horn, we will have it working in short order.  |
Hi Spud,
The final wiring!!!
Okay I checked out the horn. Opened upthe switch and looked inside.
The wire I see for the HORN button is LIGHT GREEN, single wire going to the button. I follow that down and it goes to a connector. There is also a green wire with the same PLASTIC PROTECTOR as the LIGHT GREEN wire. The green wire is not in the SWITCH at all, and I wired that green wire to the front ground wire, not on the frame with the BLINKER ground wires. So really, there is NO power at all going to the horn, haha. Where do I do this and what is the proper wiring method to make my horn work. Id rather wire it to the Ignition switch or the light switch ON or OFF.
Spud can you tell me exactly what wires to hit up?
Thanks a lot for all the help, you are awesome!
