[QUOTE=Diggy;208346]
Quote:
Originally Posted by SpudRider
Free is the best price. 
Yes, the Tridon EP28 should work well.  The '+' terminal connects to a power wire coming from your ignition switch, or the battery. The '-' terminal connects to the frame for a ground. The 'L' terminal connects to the grey wire leading to your turn signal switch.
After connecting the flasher in the above manner, you turn signals should blink properly. 
Spud,
Is any of the Orange or Light Blue wires connected to this flasher at all or it should operate through the switch its self.
I'm not to sure why its not working when I set it up like you said.. hmm  |
The orange wire provides power to the left side blinkers, and the light blue wire sends power to the right side blinkers. Only the grey wire is connected to the flasher.
Perhaps your 'free' flasher is bad.
__________________
Spud
"Never argue with an idiot. He will drag you down to his level, and beat you with experience."
Mark Twain
2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220
Mods made to my Zongshen ZS200GY-2:
http://www.chinariders.net/showthread.php?t=6894