ChinaRiders Forums - View Single Post

rojo_grande · 02-17-2016, 12:10 AM

Here's a link to the thermo bob. http://watt-man.com/ I believe there is a KLR250 version. Check the info and articles/FAQ section.

Also available at rocky mountain atv but I believe only for KLR650.

$.22 mod is just a way to shim the stock needle. Add a couple #4 stainless washers under the needle and drill the hole in the slide a little. At least for the KLR650, it wakes it up a bit, better throttle response. KLX needle kit is also and option.

Rojo

02-17-2016, 12:10 AM	#7
rojo_grande Join Date: Jun 2015 Location: Weston, CO & Sangre de Cristos Posts: 240	Here's a link to the thermo bob. http://watt-man.com/ I believe there is a KLR250 version. Check the info and articles/FAQ section. Also available at rocky mountain atv but I believe only for KLR650. $.22 mod is just a way to shim the stock needle. Add a couple #4 stainless washers under the needle and drill the hole in the slide a little. At least for the KLR650, it wakes it up a bit, better throttle response. KLX needle kit is also and option. Rojo __________________ '15 RX3 (Rojo's) '15 RX3 (marzhere's) '16 TT250
	1