Fork Disassembly and Inspection
Upper Fork Tube Disassembly
To disassemble the forks, begin by loosening the cap of the fork with a 19 mm wrench. Lower the upper fork tube to reveal the fork spring. Insert a 14 mm cone wrench, or another thin wrench, between the fork coils, and grab the lock nut below the fork cap. While holding the lock nut, remove the fork cap and washer with a 19 mm wrench.
Remove the fork spring, and drain the fork oil.
Remove the upper fork tube following the instructions in the CSC Fork Maintenance Tutorial at the following link.
http://www.cscmotorcycles.com/Articles.asp?ID=263
__________________
Spud
"Never argue with an idiot. He will drag you down to his level, and beat you with experience."
Mark Twain
2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220
Mods made to my Zongshen ZS200GY-2:
http://www.chinariders.net/showthread.php?t=6894