Quote:
Originally Posted by dave92029
Thank you.
The rear valves are adjusted. I just need to do the frt valves.
I removed this bolt to loosen the radiators (one on each side)
The issue is I have large hands, and the frame brace that supports the radiator appears to be blocking access to the frt. valve cover. How do I get my hand and the required tools past the frame brace to access the frt. valve cover?
|
There are
two bolts which secure
each radiator. You need to locate, and remove the other two bolts. Once
both bolts are removed from
both radiators, you can push the radiators out of the way to make room for your hands.
You won't be able to fit your hands past that frame brace. I accessed the exhaust valves from the left and right sides of the bike, working in the enlarged areas I created by pushing/pulling the radiators out of the way.
__________________
Spud
"Never argue with an idiot. He will drag you down to his level, and beat you with experience."
Mark Twain
2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220
Mods made to my Zongshen ZS200GY-2:
http://www.chinariders.net/showthread.php?t=6894