Thread: At wits end
View Single Post
Old 06-06-2015, 12:50 PM   #8
No1Vic   No1Vic is offline
 
No1Vic's Avatar
 
Join Date: Mar 2015
Location: West Midlands, UK
Posts: 56
Hi fishman10, when I first had my RX3 it was terrible stalling at every opportunity to the point I parked it up and walked away for a month in frustration, started using it again recently and I had another problem develop where the idle was all over the place resulting in the engine check light coming on, code 0505 idle control error was diagnosed.... I removed the two electrical connectors to the throttle stepper motor expecting possible water ingress but they were clear, after refitting the connectors securely the bike now starts and runs perfectly...Also suffering from the rising oil level, removed 300ml to bring it down to the upper level! stunk of fuel so changed the oil completely and will see how it goes this coming week. The only other thing I changed is my riding style, was trying to keep below 4500rpm for the initial engine break in but now using all it's rev range. Katflap was having similiar trouble with oil contamination and has replaced his fuel injector so look forward to his updates.
__________________
2015 Honley RX3
2010 Suzuki 1250 Bandit
2006 Suzuki Hayabusa


 
Reply With Quote