View Single Post
Old 03-22-2015, 02:10 PM   #5
Trailbikeryder   Trailbikeryder is offline
 
Trailbikeryder's Avatar
 
Join Date: Jan 2013
Location: Germany
Posts: 231
I had some time today to have another look at the bike. I took the gas tank off, and I found the problem. The cable coming from the ignition was disconnected. Inside the plug there was corrosion, so water must have entered there too. I plugged everything back together and sealed the plug so in the future no water could enter anymore. The disconnection was caused because the cable was not in the correct place. When the handlebar was turned to the right it pulled on the cable too much which caused the disconnection of the plug.
__________________
My CB : http://www.youtube.com/watch?v=ZbZ8q-grmOQ

2012 Skyteam V-Raptor 250
2011 Yamaha Tenere XT 660Z abs
1996 Kawasaki Vulcan 800 Classic
1989 Kawasaki GPZ 500


 
Reply With Quote