ChinaRiders Forums - View Single Post

Weldangrind · 02-24-2015, 10:47 AM

Take your time on the pic.

Fitting a clone motor into the SL100 might be a bit of a chore, but it's workable. The clone motors are based on the 50 and 70 frame of architecture (FOA), whereas the sl100 could be a different mounting pattern.

This is one source for adapters: http://www.dratv.com/adchtob.html

There is a ton of good info on horizontal clone swaps here: http://www.dratv.com/eninkico.html

02-24-2015, 10:47 AM	#23
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Take your time on the pic. Fitting a clone motor into the SL100 might be a bit of a chore, but it's workable. The clone motors are based on the 50 and 70 frame of architecture (FOA), whereas the sl100 could be a different mounting pattern. This is one source for adapters: http://www.dratv.com/adchtob.html There is a ton of good info on horizontal clone swaps here: http://www.dratv.com/eninkico.html __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0