ChinaRiders Forums - View Single Post - New Zongshen RX3 (ZS250GY-3) Dual Sport

katflap · 02-05-2015, 04:09 PM

A little bit of info.

Top box & large pannier inside measurements w = 38cm, L = 28cm, Depth including lid recess 19cm
Smaller pannier is the same but the depth is reduced to 8cm * for a good 50% of it.
(* I think 8cm is correct struggling to read my own hand writing)

Oil filter
100mm long (metal to metal) with a diameter of 30mm
One end at the centre seems to have a ball bearing and spring style pressure relief valve.
The other end has a glued rubber washer diameter of 25mm, thickness 2mm and hole in the centre of 8 or 9 mm.

Download - circuit diagram including EFI in English
https://mega.co.nz/#!40pADJjZ!1wOenhh9h9QCaSRghWwUlhx_MmcUInDCnSTmBts 4VQE

If your bikes do come with a retracting side stand it’s quite easy to modify if you want to. Im thinking of rigging up a switch and buzzer to let me know when it’s still down!

02-05-2015, 04:09 PM	#1722
katflap Join Date: Jan 2015 Location: England Posts: 382	A little bit of info. Top box & large pannier inside measurements w = 38cm, L = 28cm, Depth including lid recess 19cm Smaller pannier is the same but the depth is reduced to 8cm * for a good 50% of it. (* I think 8cm is correct struggling to read my own hand writing) Oil filter 100mm long (metal to metal) with a diameter of 30mm One end at the centre seems to have a ball bearing and spring style pressure relief valve. The other end has a glued rubber washer diameter of 25mm, thickness 2mm and hole in the centre of 8 or 9 mm. Download - circuit diagram including EFI in English https://mega.co.nz/#!40pADJjZ!1wOenhh9h9QCaSRghWwUlhx_MmcUInDCnSTmBts 4VQE If your bikes do come with a retracting side stand it’s quite easy to modify if you want to. Im thinking of rigging up a switch and buzzer to let me know when it’s still down!
	0