Quote:
Originally Posted by Gr8rcher
Setting for this motor is .003 MM on both.
|
I think that's gotta be 0.03mm. 0.003mm is 1 ten-thousandth inch (0.0001").
Wow, even then, 0.03mm is only 0.001" and that seems just W-A-A-Y-Y tight to me. I've never had an engine with less than 0.002" intake and 0.004" exhaust.
*edit* just looked up in my own Baja 250's owner's manual: intake and exhaust clearance spec is 0.002" (0.051mm). Wow.