ChinaRiders Forums - View Single Post - New Zongshen RX3 (ZS250GY-3) Dual Sport

SpudRider · 11-14-2014, 12:07 PM

Here is some good information I discovered regarding the RX3. It appears the bike's swingarm does employ the bushings and needle bearings used by the Zongshen ZS150GY-10.

Here is a photograph of the RX3 swingarm.

Here are several links at Taobao for the ZS150GY-10 needle bearings.

http://item.taobao.com/item.htm?spm=...cket=19#detail
http://item.taobao.com/item.htm?spm=...cket=19#detail

Here are several links at Taobao for the end cap bushings of the ZS150GY-10.

http://item.taobao.com/item.htm?spm=...cket=19#detail
http://item.taobao.com/item.htm?spm=...cket=19#detail

11-14-2014, 12:07 PM	#776
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Here is some good information I discovered regarding the RX3. It appears the bike's swingarm does employ the bushings and needle bearings used by the Zongshen ZS150GY-10. Here is a photograph of the RX3 swingarm. Here are several links at Taobao for the ZS150GY-10 needle bearings. http://item.taobao.com/item.htm?spm=...cket=19#detail http://item.taobao.com/item.htm?spm=...cket=19#detail Here are several links at Taobao for the end cap bushings of the ZS150GY-10. http://item.taobao.com/item.htm?spm=...cket=19#detail http://item.taobao.com/item.htm?spm=...cket=19#detail __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 Last edited by SpudRider; 11-14-2014 at 12:53 PM.
	0