[FLASHLIGHTBOY]

Hello.... you can get the wiring for the beast from GIO... or the wires that you show from the stator has 2 different plugs... there is the white connector plug like in the pic and then it would probadly have one loose wire that is a push in... the wires that WELD talks about you can see the wires come from the shift indicator plug on the side of the motor... near the drive gear.. those just go to your lights... you would be better off to solder all the wires and use shrink tube to seal them... no problems with moisture then... and a good connection... you can use VASOLINE to seal any connectors you still have... this is the same as electrical sealant.. as I said.. you can buy the right wiring harness from GIO but some one has cut off the connectors from your stator... or go to your local electrically ( hobby store) and buy some connectors and re wire it ... I would just leave them soldered and shrink tubed or taped up... put them in some nice plastic loom... done..