[zingshoen]

i d like to put this up for discussion:

http://www.pccmotor.com/30mm-mikuni-...-30200250.html

seems to be a 26mm mikuni as stamped on the carbie in the 5th picture. Carburetors are measured by bore size not by inlet or air intake openings.

or could i be wrong here? :?

+++

the 30mm mikuni is here:

http://www.mikuni-topham.de/ENGLISHS...e_English.html

click on VM carburettors
scroll to VM30-83 that s the mikuni roundslide carbie
40mm front and 58 mm rear spigot diameter

flatslide would be better, but at least its 30 mm are real :-)
+++
the 26 mm carbie may have its applications, but for a 250 cc it would be underpowering.

or could i be wrong? 8)