|
Ok So after screwin' around some more I found my intake leak. The gasket between the intake runner and the cylinder was torn and leaking bad.
Replaced it. And re installed the mikuni. It idles perfect and ran awesome at around 1/4 throttle, but anything more and it fell flat on its face. So I think you NEED the bigger jets in it for it to work.
So I swapped back to the original carb, and got the machine running. It still is running kinda crappy, but I have to play around with the air fuel and such.
When I give the quad a quick rev, it kind of holds at high rpm, then drops a bit slower. So i'll have to adress the issue.
|