ChinaRiders Forums

ChinaRiders Forums (http://www.chinariders.net/index.php)
-   Street (http://www.chinariders.net/forumdisplay.php?f=104)
-   -   i think ive got it (http://www.chinariders.net/showthread.php?t=12417)

Corvairkid 05-05-2013 03:47 PM

i think ive got it
 
ive been running down the voltages and the trigger coil had the right oms resistance but no voltage when rotating the motor its only geting 0.04 or .11 + volts DC but i dont think thats enough

Corvairkid 05-05-2013 03:49 PM

spud
 
i wish spud was around he seems to know a lot... SUPER SPUD WHERE ARE YOU!!!!

Corvairkid 05-05-2013 08:47 PM

nope
 
nope didnt fix it i also discovered the lifan cdi had a different pit wiring then the zong cdi.......had a lot of bikes in hte past this is my first headache .............

Corvairkid 05-06-2013 08:43 AM

well.....
 
i think i may have isolated it the green and white off of the trigger coil goes up to a plug on the other side (wiring harness for the bike side) the wire turns solid green and that side is grounded no matter where i touch so ill be un tapping the harness and looking for shorts there

Corvairkid 05-06-2013 09:02 AM

i found this
 
http://i1237.photobucket.com/albums/.../zong200cc.jpg

i found this on another post and going by this my 250gs trigger wire is wired wrong the green and white i have is going to ground not an isolated circuit

Weldangrind 05-06-2013 11:09 AM

Before you go further, do you have a four pin reg and an eight pin cdi, like in the diagram?

Corvairkid 05-06-2013 03:04 PM

hmm good chatch
 
5 wire regulator..... 3 yellow 1 red 1 green

Corvairkid 05-06-2013 03:05 PM

and yes the cdi is 8 pin Zong orgnial also have a lifan 300cc box 8 pin

Corvairkid 05-06-2013 03:18 PM

closer
 
this is a closer diagram of my bike i'm missing the black wire off my regulator tho its in the harness and in the plug but no hole in the regulator where a wire might have come from or markers of where it was in the regulator plug but like i said on the harness side there is a dead ended black wire http://i216.photobucket.com/albums/c...ingdiagram.jpg

Corvairkid 05-06-2013 07:23 PM

LOOK WHAT I FOUND!!
 
http://wtmp.en.alibaba.com/ They make the cdi box's time to get some i'm trying to order 2 for my self.

Corvairkid 05-06-2013 09:51 PM

i love talking to my self
 
i hope these updates help people i'm talking to a china men in china who's supplied me inventory for my shop he's vary happy with these bikes (he owns 4) and said they are like a Chinese Harley they run like tops till they cough i have him on Skype on a 3 way with the parts suppler i posted in my earlier post

Weldangrind 05-07-2013 12:41 AM

Cool! How is his English?

Corvairkid 05-07-2013 01:15 AM

english is ok not the best but ive seen way worse
 
English was ok a but broken and confusing as to the terminology but once i learned the terminology like a "winker" is the flasher and the CDI is a ignitor so-forth and so one any ways its 60 USD for a cdi with DHL shipping expedited 7-10 day shipping

i talked with wtmp and best to there knowledge ZS ly200 cdi WILL work with a zs250GS.....

Corvairkid 05-07-2013 01:26 AM

after reviewing the logs of the the convo i found out they are going to make an ali express listing for cdi box's on www.aliexpress.com that meens factory direct CD box's for us [/url]

Corvairkid 05-07-2013 07:45 AM

250cc cdi box
 
http://wtmp.en.alibaba.com/product/2...ngshen250.html here you are 250cc cdi box for zonghen


All times are GMT -4. The time now is 11:54 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.