ChinaRiders Forums - No plans to import RX3S from CSC after initial eval.

Page 1 of 3

Show 40 post(s) from this thread on one page

ChinaRiders Forums (http://www.chinariders.net/index.php)

- Zongshen RX3 (http://www.chinariders.net/forumdisplay.php?f=136)

- - No plans to import RX3S from CSC after initial eval. (http://www.chinariders.net/showthread.php?t=22311)

Sullybiker

10-02-2018 06:58 PM

No plans to import RX3S from CSC after initial eval.

Well, that answers that.

Quote:

CSC Motorcycles has posted the chart below comparing the different models. Each of the FOUR models shown have DIFFERENT motors, frames and rider geometry. NOTE: after initial testing and evaluation it has been determined that the RX3S is designed specifically for the smaller Asian rider and will NOT be imported into the U.S. However, it is possible that the 380cc twin cylinder motor may be used in other models in the future. Stay tuned to CSCmotorcycles.com for more information.

Source: http://californiascooterco.com/blog/?p=30049

Essayons

10-02-2018 07:52 PM

I was told the same thing when I went there today. They took both bikes to a motorcycle show recently. The riders that rode them all basically said the same thing about the RX3S. The foot pegs were to high and hurt their "B***s".

1cylinderwonder

10-02-2018 08:18 PM

Why post these two bikes if you’re just checking?

Why post the photos and specs on the CSC Home page if you have no intention of going forward with any of the bike’s?
JUST TESTING?
NOTHING ELSE TO DO?
YOU NEED SOME NEW MERCHANDISE OR MODELS TO EXPAND YOUR MARKET!
GOOD LUCK!
PCG :crazy:

rd1959

10-02-2018 08:44 PM

If they're thinking of using the 380 in another model how about an RZ3s? I probably would have bought an RZ3 instead of the RX3 if it had been available.

Juanro

10-02-2018 08:50 PM

1 Attachment(s)

Well, Zongshen already have the Cyclone RE3 (ZS400)...
https://www.facebook.com/pg/MoMoMoto...34403610035587
(I think the link is public)

Juanro

10-02-2018 08:57 PM

1 Attachment(s)

But, if you insist in it being an RZ3S …
https://www.facebook.com/pg/MoMoMoto...93323254143623

rd1959

10-03-2018 05:25 AM

Quote:

Originally Posted by Juanro (Post 291742)

But, if you insist in it being an RZ3S …
https://www.facebook.com/pg/MoMoMoto...93323254143623

That CFMoto 400GT in the video is exactly what I've been wanting.

JerryHawk250

10-03-2018 09:51 AM

Well that sucks. But if designed for a short person then that would leave me out. Does seem like the perfect HP and weight.

Sullybiker

10-03-2018 10:59 AM

Quote:

Originally Posted by Juanro (Post 291741)

Well, Zongshen already have the Cyclone RE3 (ZS400)...
https://www.facebook.com/pg/MoMoMoto...34403610035587
(I think the link is public)

That's like a little Triumph Street Twin.

So many interesting bikes around the world.

rojo_grande

10-03-2018 05:08 PM

Wouldn't mind seeing the 380 motor in a lightweight dual sport/enduro type perimeter frame and/or in a super-moto set up. It would need different gearing to make it a little more trail worthy.

Rojo

NzBrakelathes

10-08-2018 12:48 AM

Quote:

Originally Posted by rojo_grande (Post 291796)

Wouldn't mind seeing the 380 motor in a lightweight dual sport/enduro type perimeter frame and/or in a super-moto set up. It would need different gearing to make it a little more trail worthy.

Rojo

Too wide
The NC450 come in MX style bikes already tho

NzBrakelathes

10-08-2018 12:53 PM

I think this will be the next option for low cost adv
Being released in the USA at some point

NzBrakelathes

10-08-2018 12:54 PM

Twin 500cc

NzBrakelathes

10-08-2018 07:08 PM

I couldn’t resist the photo opp!

sqwert

10-09-2018 11:00 PM

CSC come across as a fine group? They treat us well. Between you and CSC I can honestly say best I've ever had for online motorcycle support.

All times are GMT -4. The time now is 10:03 PM.

Page 1 of 3

Show 40 post(s) from this thread on one page