>:( The person that sold you the bike is a POS !!! I am not a mechanic and not sure if this will work ??? Run alittle diesel fuel mixed with Rotella 15w-40 to clean the engine out a few times . Don't ride the bike , just to flush the engine out . Get the engine hot , drain , clean the filter , and do it again. This should flush the engine from the plastic that is in the engine .I hope this helps !!!
IF NOT GO TO THE PERSON THAT SOLD YOU BIKE AND KICK HIM IN THE SACK!!!:clap: |
Quote:
[QUOTE=BlackBike;234131] Quote:
Quote:
|
The good news is that the centrifugal oil slinger will capture what the strainer missed. It's a good opportunity to clean the centrifugal unit out, since that's a job that people rarely do. It's probably a good plan to pull the valve cover off and see if there's any debris up there; I doubt there is.
It was nice of the PO to call and warn you. BTW, once you've got it cleaned out, don't bother replacing the dipstick. Just use the sight glass. |
That's good to know. I was wondering if there was a stronger replacement out there.
Well I've got the bike torn apart (kind of) and I found the f*@$er. Still instant for the most part. I'll update with pics later |
*intact for the most part
|
Alright, so my garage is dimply lit, so I decided to try my chances at getting it through the door of the shop... it fit! by half an in lol!
https://scontent-atl3-1.xx.fbcdn.net...4c&oe=58A1A3F2 https://scontent-atl3-1.xx.fbcdn.net...8b&oe=58943FA2 https://scontent-atl3-1.xx.fbcdn.net...b6&oe=589B5F1F So I took the cover off, and there it was. https://scontent-atl3-1.xx.fbcdn.net...83&oe=58A6DB12 https://scontent-atl3-1.xx.fbcdn.net...54&oe=58A52033 https://scontent-atl3-1.xx.fbcdn.net...3a&oe=5895D2E0 I can't seem to get the centrifugal oil filter cover off. Videos show people just pulling them off, this one will not budge. |
Haha, there she blows. Bet y a feel good finding that:tup:
|
I fee great finding that much of it in one peice lol! With the centrifugal oil filter, do I just pop the cover off, wipe it out and put it back on or do I take that nut out and clean it deeper?
|
Where would I get gaskets for this motor? Ebay my only option?
|
Picked up some gaskets for this thing locally. But damn were they expensive.
Hope I can get it back together and the valves adjusted today |
only one of the gaskets was correct. I've been fighting with them to get off their asses and call whoever they said they'd call to find one since I got home yesterday. The guy swears he'll have one tomorrow.
In other news... parts! https://scontent-atl3-1.xx.fbcdn.net...25&oe=58AA99B1 https://scontent-atl3-1.xx.fbcdn.net...11&oe=589CB8E7 https://scontent-atl3-1.xx.fbcdn.net...58&oe=585F5584 So I put in a new spark plug (found out it already had an NGK plug but oh well), adjusted the valves (I'm not too confident with the job I did, so I may redo them tomorrow just to be sure) and pulled all of the plastics in preparation for a new cluster and some paint. https://scontent-atl3-1.xx.fbcdn.net...71&oe=589BD65D https://scontent-atl3-1.xx.fbcdn.net...77&oe=589CDD37 As for paint, what color do you think I should paint it?Midnight blue (or something similar) or Charcoal Grey (or something similar)? Also, chrome or black for the wheels and forks? https://scontent-atl3-1.xx.fbcdn.net...ef&oe=58AA7E3F https://scontent-atl3-1.xx.fbcdn.net...37&oe=58A53311 https://scontent-atl3-1.xx.fbcdn.net...93&oe=585F6BC2 https://scontent-atl3-1.xx.fbcdn.net...89&oe=58A58E26 |
Wow. That's one of the reasons I don't want to buy a used bike!
|
Yeah I'm regretting it. But I'll still come out ahead of a new one with all of these upgrades (price wise) when I put it back together
|
After reading this thread I headed to the garage, removed the dipstick/oil plug from my Hawk and hacksawed off the dipstick portion as a precaution.
As for color, I vote for the charcoal black, but they both look good. Keep fighting the good fight. If nothing else you'll know your bike quite intricately by the time you get it set up and running how you want. -Dan |
Quote:
That's the one I'm leaning towards too. Finding some dark grey spray paint at walmart (giftcard...why not right?) is proving to be difficult I know it much better than I should after owning it for a week lol |
All times are GMT -4. The time now is 07:25 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.