ChinaRiders Forums

ChinaRiders Forums (http://www.chinariders.net/index.php)
-   Dual Sport/Enduro (http://www.chinariders.net/forumdisplay.php?f=101)
-   -   Oops over- drilled (http://www.chinariders.net/showthread.php?t=26488)

KseKermit 05-26-2020 07:22 PM

Oops over- drilled
 
1 Attachment(s)
I don't recommend it, I'm lucky nothing broke off and went into my engine. I over drilled my 105 main that comes in the brozz, so I decided I wasn't waiting for my jet kit to get here to ride, so this is what I rigged up. Copper wire bent to restrict flow with another piece holding it on. Wasn't too bad actually.

Weldangrind 05-27-2020 09:12 PM

I've flowed a little solder into jets that were too big and drilled again. So far so good.

franque 05-28-2020 03:23 AM

Yeah, just solder and redrill... That probably won't run too well.

Megadan 05-28-2020 06:05 AM

Or, just buy a cheap main jet kit and skip having to drill? less than 9 dollars. https://www.amazon.com/10pcs-Carbure...omotive&sr=1-6

Are they as good as genuine jets? No, but they still work.

KseKermit 05-28-2020 07:10 PM

Quote:

Originally Posted by Megadan (Post 338971)
Or, just buy a cheap main jet kit and skip having to drill? less than 9 dollars. https://www.amazon.com/10pcs-Carbure...omotive&sr=1-6

Are they as good as genuine jets? No, but they still work.

Yep I had one ordered, was waiting on it to deliver while I was "fixing" my oops.

KseKermit 05-28-2020 07:12 PM

Quote:

Originally Posted by franque (Post 338961)
Yeah, just solder and redrill... That probably won't run too well.

It ran super good actually! Hit 70mph, was a tad rich but still got the job done.


All times are GMT -4. The time now is 07:42 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.