Kill Switch Bashan Storm 250
 

So TLDR my Bashan storm does not have a kill switch. It instead is a hazard light......could I rewire my hazards to be the kill switch?

Side note: the alarm system and keyless start bs was removed already so thats not in the bike :thanks:

That's a good question and would like to know myself since my Brozz Recon 250 has the same setup.

Check out a post from goat67 on 7-4-2020. He explains how to re-wire the switch.
Assuming the wire colors are the same on these bikes.

Thanks that helps a ton.

Check this post. https://www.chinariders.net/showpost...36&postcount=9

Thanks all! Ended up following goat67's way of doing it and got it to work pretty easily. Completely cut the orange wire off and just spliuced the blue to the green and the grey to the black and white. Very easy honestly and happy I didn't need to pay anything to do it.