Lifan 200cc carb jetting
I have the Lifan 200cc in the XR200 frame with stock carb but with the pod air filter. Yes I know it would be easier to just use the kick starter but the whole reason I got this engine was for the electric start so using the stock air filter and air box are not an option. What jet, needle and fuel screw settings do I need to start at, nothing seems to work.
|
My Lifan 200 with a PZ30 carb uses:
Main jet 108 Pilot jet 40 Clip in middle slot This is with a foam pod filter. |
Quote:
|
On my old XT200GY, I had my PZ30 carb dialed in at:
#110 main #40 pilot 1-2/3 turns out on the mixture screw Needle clip one below middle I have a K&N style pod filter... living at 2200ft altitude. Cheers! |
Quote:
Thanks again. |
We work hard to not allow anyone to flame you here. We want everyone to feel comfortable asking questions; we all started somewhere.
Will the stock airbox not work because the starter interferes with the housing? Depending on the model year of your XR200, you might be able to fit the stock box by using an XR intake tube. Just spitballing. |
My comment on your other thread was only based on the fact that I find deleting the airbox for any reason to be bad (it generally reduces power/efficiency), it wasn't to imply that you are weak if you don't kickstart your bike.
|
All times are GMT -4. The time now is 08:58 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.