Confirmed Torque Specifications: Zongshen RX3
 

This thread contains a list of confirmed torque specifications for critical bolts of the Zongshen RX3 motorcycle. This thread is closed. Please contribute your confirmed torque specifications at the following thread. Thank you. :)

http://www.chinariders.net/showthread.php?t=15535

Lower Shock Linkage

All bolts for the rocker/knuckle/arm, except the lower shock bolt: 38 foot-pounds
All bolts for the link/dogbone: 38 foot-pounds
Lower Shock Bolt: 33 foot-pounds

Upper Shock Bolt

33 foot-pounds

Swingarm Bolt

54 foot-pounds

Rear Axle Bolt

50 foot-pounds

Torque Specifications Taken from the AJP PR5 Owner's Manual

Oil Drain Plug, Oil Screen Plugs, Oil Filter Cover

Oil Drain Plug: 18.5 foot pounds (25 Nm)
Oil Screen Plugs: 18.5 foot pounds (25 Nm)
Oil Filter Cover Bolts: 6 foot pounds (8 Nm)

Cylinder Head

Cylinder Bolts: 28 foot pounds (38 Nm)

Triple Head Clamps

Upper Triple Clamp: 15 foot pounds (20 Nm)
Lower Triple Clamp: 9 foot pounds (12 Nm)

Torque Specifications Taken from the Gas Gas EC Cami 250 Owner's Manual

Front Brake Caliper Bolt: 18 foot pounds (25 Nm)
Engine Mount Bolts: 26 foot pounds (36 Nm)
Crankcase Bolt: 7 foot-pounds (10 Nm)

General Torque Specifications

M4 Nuts & Bolts: 26 inch-pounds (3 Nm)
M5 Nuts & Bolts: 53 inch-pounds (6 Nm)
M6 Nuts & Bolts: 10 foot-pounds (7 Nm)
M8 Nuts & Bolts: 18 foot-pounds (25 Nm)
M10 Nuts & Bolts: 33 foot-pounds (45 Nm)

Torque Specifications Taken from the Gas Gas EC Cami 250 Owner's Manual

http://i442.photobucket.com/albums/q...psnnikfilm.jpg

Please note, the torques in this diagram are specified in newton-meters. The following link will convert newton-meters to foot-pounds. ;)

http://www.convertunits.com/from/N+m/to/ft+lb