TT250 Sprocket Recommendations
 

Hey everyone,

So I got my aftermarket exhaust, digital cluster, jetting and few other mods done. Bike runs great, tops out around 70. Anyone have some good sprocket recommendations so I can get a little more speed for highway riding. From what I've read the stock sprocket is 50T and a couple people tried at 47 with good results. Anyone know where I can get a good deal on a 47T sprocket that's TT250 compatible?

steel: http://www.jtsprockets.com/catalogue/sprocket/JTR269
aluminum: http://shop.pbisprockets.com/product...&categoryId=17

right now I'm running a aluminum 46, but will probably go back to the 47 next time I have the rear wheel off.

You may also find you do not pick up top speed, but that you'll do the same top speed, but with less revs...

also, you can order aluminum from the PBI site. To get the steel JTR's use google/amazon.

This is what I used on our TT250.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

I haven't done a top speed run but it doesn't seem to lack. The 47 also left a trailable 1st gear.