ChinaRiders Forums

ChinaRiders Forums (http://www.chinariders.net/index.php)
-   Pit/Pocket Bikes & Scooters (http://www.chinariders.net/forumdisplay.php?f=111)
-   -   Any Boom Vadrs In This forum?? (http://www.chinariders.net/showthread.php?t=30433)

Hozer 03-04-2022 09:29 PM

Any Boom Vadrs In This forum??
 
Any Boom Vaders/Grom Clones In This forum?? Just curious I just bought one. I understand there are a few things yo gotta do to make sure the bike is dependable. Any suggestions?


Thanks in Advance

culcune 03-07-2022 10:50 AM

Quote:

Originally Posted by Hozer (Post 373420)
Any Boom Vaders/Grom Clones In This forum?? Just curious I just bought one. I understand there are a few things yo gotta do to make sure the bike is dependable. Any suggestions?


Thanks in Advance

There are several members with them; surprised no one has answered you. Member 4T_Goblin has been the most recent one that comes to mind. Someone just posted a guide in the Vader sticky up in the 'Street' section (people post in both this section and 'Street' about their Vaders); look at the link in the last post. Also, Pete at Kronik Racing has these well sorted out, as one of the biggest Vader dealers (he sells a lot of them out of his brick and mortar shop as well as mail-order) www.kronikracing.com

http://chinariders.net/showthread.php?t=24100

Hozer 03-07-2022 11:50 AM

Well thanks for the heads up. I just kinda look around and looks like its been a while since people have posted anything about the Boom Vader hummm O well.

4T_Goblin 03-07-2022 12:07 PM

I have one. 2020 Vader

Hozer 03-08-2022 09:50 AM

Quote:

Originally Posted by 4T_Goblin (Post 373507)
I have one. 2020 Vader


I just got mine a few days ago. Here is the mods I working on now:

1. 17t sprocket
2. Just removed all the smog crap
3. Removed decals with hair dryer
4. Removed stock carb
5. Bought new vm22 carb and put in a 110 main jet
6. Install new Honda Grom rear hub dampners
7. installed blue loctite on most bolts

--------
Still to do:
Buy New battery
Install new carb
Buy and install new crank case filter
install new chain
Install GPS mount
Install New Petcock
Install GPS wiring
Buy new Handle Bars
Installing new front motor mount:
https://www.youtube.com/watch?v=kxUtdLv3sX8
-----------

If anybody has any other thing to do to make this bike more
dependable please let me know!


Thanks in advance :)

4T_Goblin 03-08-2022 12:24 PM

Sounds good. That's about what I did to mine, the 17t and pro Taper bars were already installed, I bought it used
I put a genuine VM 22 and a new pipe and muffler, cleaned the chain, it runs great. The only issue I have is a venting issue, I get air bubbles in my gas line from tank to filter. Other than that runs great and it's a ton of fun. One day I might main jet back up to 105.

CheapThrills 03-08-2022 01:38 PM

Just got a new Boom Vader, so following along.

Hozer 03-08-2022 04:37 PM

Quote:

Originally Posted by 4T_Goblin (Post 373552)
Sounds good. That's about what I did to mine, the 17t and pro Taper bars were already installed, I bought it used
I put a genuine VM 22 and a new pipe and muffler, cleaned the chain, it runs great. The only issue I have is a venting issue, I get air bubbles in my gas line from tank to filter. Other than that runs great and it's a ton of fun. One day I might main jet back up to 105.




Keep in mine I have all the smog crap pulled off!



I bough this vm22 carb. What piece of crap!! The bike wont fire up!!

I put the orig Carb Back on just for fun and guess what? The bike fires right up no problem.


So what would you guys suggest for a good carb for my bike.

This VM22 carb kit really sucks!. I even put a 110 main jet in and still won't fire up!!



So I hope you geniuses have some good Ideas for a decent carb.

I here the Mikuni VM22 Carburetor are supposed to be decent )



Thanks guys!

4T_Goblin 03-09-2022 05:56 PM

The main jet doesn't have anything to do with idle so you might look at your idle circuit.

Are you sure you had gas flowing through the carb when you swapped it the first time?

Hozer 03-09-2022 06:02 PM

Quote:

Originally Posted by 4T_Goblin (Post 373636)
The main jet doesn't have anything to do with idle so you might look at your idle circuit.

Are you sure you had gas flowing through the carb when you swapped it the first time?


I know that bud :) I even put in the stock main jet. The bike will not start. It get gas for sure. But like I said when I put the stock carb back on the bike fires right up no problem. Just for shitz and giggles I'm gonna but a new Mikuni carburetor and see what happens.


Thanks for the reply :)

Hozer 03-13-2022 03:48 PM

Quote:

Originally Posted by 4T_Goblin (Post 373552)
Sounds good. That's about what I did to mine, the 17t and pro Taper bars were already installed, I bought it used
I put a genuine VM 22 and a new pipe and muffler, cleaned the chain, it runs great. The only issue I have is a venting issue, I get air bubbles in my gas line from tank to filter. Other than that runs great and it's a ton of fun. One day I might main jet back up to 105.


Well my new carb come in next week> Here is the new kit I just bought.
https://www.ebay.com/itm/162867197369


I hope lol it is a good one. :hmm:

Deckard_Cain 03-14-2022 09:58 AM

I have a 2020... swapped with a ZS190.

Far too many other mods and upgrades to mention right now. Love the bike.

spyders 03-25-2022 09:38 AM

:hi::hi::hi::hi:I have a bd125-10 boom Vader. Looking at dual exhaust options at the moment.

CheapThrills 04-30-2022 08:39 AM

Wish I had more time, got a Boom Vader 125-10 and with limited amount of time and weather issues, it's been a blast to ride, just wish it was faster like 55mph(GPS). But fun bike!!!

4T_Goblin 04-30-2022 12:26 PM

I get mine to 61 ringing it out


All times are GMT -4. The time now is 07:21 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.