valve settings for sinnis 125 and others
 

ive found the setting for the 200+ but nothing on the 125's , also which is the inlet and which is the exhaust valve on the bike looking at if from kickstart side, help appriciated thanks

The intake valve is closest to the carb. The exhaust valve is closest to the exhaust pipe.

cheers bud, do you know the sizes to be set at

To the best of my knowledge, the Qingqi 125/Sinnis 125 is not sold in North America. Therefore, most of the members of our forums are unfamiliar with your bike. ;)

We are very glad you are here, and we wish to learn more about your motorcycle! :) I'm not trying to send you elsewhere, but I think you might have better luck finding the valve specs by searching, and posting this particular question on the Mychinamoto.com forums. ;)

However, I might be wrong. I hope one of our forum members will quickly volunteer the information, and prove me incorrect! ;)

Spud :)

Is it a honda style engine. Probably going to be the same specs as the 200.

Allen

I think he has a Suzuki engine, as with the QLink motorcycles, Allen. ;)

Spud :)

sorry i keep forgetting that theres many differnt makes of the bike but all look the same, my exact bike is a qingqi 125, the one that looks exactly the same as sinnis apache 125, pulse adrenaline 125, qlink125-200,superbyke rmr125 i didnt reaslise that there actually diferent spec bikes i thought they were just re-branded thanks again

The engine is a Honda clone, I now have a Superbyke 125 motor in my Hongdou. I used the same valve clearances as the 200, .005".

Jonathan.

Ignore me, I should've checked before I opened my mouth. The current Superbyke range and the Sinnis Apache are indeed Suzuki clones.

Jonathan.

so .05 intake and .05 for the exhuast :mrgreen:

The .005" was for the Honda clone motor, what's confused me is that Superbyke has very recently changed from Honda to Suzuki clones.

Jonathan.