New Hawk...! down 1 To Go.
 

Just received two new Hawks Yesterday from apscusa.com. One is assembled and all tuned up. The other is in the crating ready for assembly. The only trouble I had was that the front wheel hub spacer was missing. Luckily I have a CNC Mill so I just made one. Now to get them Titled, Registered, and Insured.

__________________________________________________ _________________
2015 haosen hawk 250 X2
2003 Honda VTX 1800R Custom

very nice!...it might just be me, but are your forks all the the way down flush to the triple tree top? front end looks a tad low.....could jut be me.

It's not just you Ron B, those front forks need to be lowered a bit by the looks of the front wheel/fender and headlight

Forks
 

The forks are set correctly. Could be I took the picture before I set everything up. It does look a bit low in this image.

Congratulations ! ! ! :tup:

Congratulations on your pair of Hawk motorcycles. :)

Congrats! I hope the second assembly goes well.


I'd love to see pics of your mill.

Milling Machine
 

Here is a picture of the milling machine. It was a wise auction purchase. I am looking at getting a cnc lathe as well but i need to save up. The one i want starts at $11,500 wich is a substantial investment for a hobby.

That's very cool! Is it a five axis mill?

Mill Specs
 

weldandgrind,

Its a 3 axis Haas OM-2A. It has a 30000 rpm spindle, 12x10x12 travel and tops out at 400ipm feedrate. I picked it up at an auction a few years ago for 10K but it had a bad spindle. I rebuilt it myself to save some money.

I'll bet there isn't much you couldn't build with it. In fact, you could probably replicate the entire mill.