ChinaRiders Forums

ChinaRiders Forums (http://www.chinariders.net/index.php)
-   Video and Pics (http://www.chinariders.net/forumdisplay.php?f=118)
-   -   Project bike finally running (http://www.chinariders.net/showthread.php?t=32391)

98 SNAKE EATER 03-12-2023 02:27 PM

Project bike finally running
 
https://youtu.be/F0a3nNr5rLw

98 SNAKE EATER 03-18-2023 03:46 PM

Easy kick start



https://www.youtube.com/watch?v=AllbdVh7254

XLsior 03-18-2023 05:57 PM

Cold start throttle squirts have the same bog, well for me anyway. So I wouldn't be concerned with it unless the bike was already at running temperature.

Seems eager to go...

98 SNAKE EATER 03-18-2023 06:45 PM

Quote:

Originally Posted by XLsior (Post 392263)
Cold start throttle squirts have the same bog, well for me anyway. So I wouldn't be concerned with it unless the bike was already at running temperature.

Seems eager to go...



Still ice cold

I have yet to run her for more than a minute as I really wanna change the oil before giving her the beans (has about a half bottle of Kroil washed down into the crankcase)

Today's goal was just checking the carb for leaks and to make sure the battery is getting charged while running (14.4v, so it's good).

Plan on ripping out all the old burnt wiring and tidying up a few things for a short road test if I have time tomorrow.

98 SNAKE EATER 03-27-2023 12:46 AM

A little rattle can tan


https://i.postimg.cc/tgDrMLPc/20230314-171458.jpg
https://i.postimg.cc/4nCwcZkY/20230314-172623.jpg
https://i.postimg.cc/h4HqsdKd/20230314-184132.jpg
https://i.postimg.cc/CKLy5CsW-/20230316-202322.jpg
https://i.postimg.cc/DydYGJ0F/20230320-181144.jpg
https://i.postimg.cc/L89Q39gP/20230320-181317.jpg
https://i.postimg.cc/PqN60S4r/20230320-182303.jpg
https://i.postimg.cc/fRqC7xN4/20230322-090322.jpg
https://i.postimg.cc/SNrDsB1x/20230322-090327.jpg
https://i.postimg.cc/3wyBtd8k/20230322-170142.jpg
https://i.postimg.cc/MKdmxyXc/20230324-093655.jpg
https://i.postimg.cc/wv8hF24r/20230324-170042.jpg
https://i.postimg.cc/sDD5nvK3/20230324-180713.jpg
https://i.postimg.cc/L6bgNvnV/20230326-115723.jpg
https://i.postimg.cc/xdyCDPTh/20230326-173913.jpg
https://i.postimg.cc/4y3n1hGM/20230326-172123.jpg
https://i.postimg.cc/wvMdf5th/20230326-174626.jpg
https://i.postimg.cc/6678TnH2/20230326-181249.jpg
https://i.postimg.cc/FzJXm9Vz/20230326-175440.jpg
https://i.postimg.cc/5tM0Rr18/20230326-173926.jpg

Thumper 03-27-2023 06:22 AM

Fantastic!!

Get a chain on there man. That bike needs a test drive!

JerryHawk250 03-27-2023 07:50 AM

Wow! what a change. Nice job! :tup:

98 SNAKE EATER 03-27-2023 08:19 AM

Quote:

Originally Posted by Thumper (Post 392626)
Fantastic!!

Get a chain on there man. That bike needs a test drive!

It was pretty rusty, but I soaked in vinegar, then boiled and re-boiled (don't tell the Mrs. I used her pot lol)


https://i.postimg.cc/Wbb4RZQf/20230301-113428.jpg
https://i.postimg.cc/28cSC6Yj/20230301-124548.jpg
https://i.postimg.cc/MpgZjFXh/20230302-120112.jpg
https://i.postimg.cc/Y9ztZ28H/20230302-170035.jpg


Still need to do a bit of wiring

That electrical drum is tiny for this bundle of snakes :tdown:

Thinking about added a relay box to the front of the frame to make things a bit more tidy :hmm:

DanDLion 03-28-2023 02:49 PM

That paint was the EXACT right color choice! =) Looks incredible!

98 SNAKE EATER 03-28-2023 03:05 PM

3 Attachment(s)
Quote:

Originally Posted by DanDLion (Post 392676)
That paint was the EXACT right color choice! =) Looks incredible!


Thanks

I went with Black and Tan to match my Land Cruiser as I'll be hauling it out back

https://youtu.be/opYuJFyu7j0

98 SNAKE EATER 04-01-2023 01:00 AM

Replacing the speedo with one that has a gear indicator

https://www.youtube.com/watch?v=SxquV5BMzf0

Need to swap the 3rd and 5th wires and add a jumper to the Neutral light

Thumper 04-01-2023 02:27 AM

I like that custom spoke lacing on the rear wheel. It looks like the rims are bespoke for that lacing pattern. It is another unique part of that piece of working art from Cleveland.

It could be kind of rare. I don't know how many they sold, but hand built customs like this are not made in high production numbers! ;)

2LZ 04-02-2023 11:49 AM

AWESOME PROJECT! Great job!

98 SNAKE EATER 04-02-2023 07:17 PM

Thanks

Looking for a little more symmetry, so I added a matching twist grip on the left side for the choke.

https://www.youtube.com/watch?v=9emd3AuwSJE

Now on the hunt for a small headlight master switch that somewhat matches the kill switch

JerryHawk250 04-03-2023 07:49 AM

That's pretty slick. :tup:


All times are GMT -4. The time now is 09:40 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.