2022 Orion 250 RXB stalling/bogging once warmed up.
 

Just bought a 2022 orion 250 rxb and can't get it to run right. Worked great for the first 2 hours but then started doing this. When cold, will idle for 15 to 20 seconds before stalling. Once warmed up, it stalls almost immediately after starting. Won't sustain rpms and stalls. Changed fuel and checked the air filter. Does anyone have any experience with this?

Sounds like you need to get in there and straighten out the mapping on that CDI.

If it were my bike I would think the air intake enrichment sensor was off tune.

Good luck.