Chines bike maybe
I have a chines bike, i think so.
Engine didnt start and i want to open the engine and do a clear from everything but i need to know what spare parts i can use. I have a 164FML Engine 200cc vertical. I cant find nothing about it on Internet. Is this engine a CG200 or something else? I need help with this. If i can revive the engine i would do evrything new on the bike. she is very old was from my friends father and he is nos abaout 70 years old :D:shrug: maybe can someone help my with this engine (i only can see 164FML and on the side of the engine CDI in big). thx |
Welcome! It sounds like you might have a CB200, based on the cover that says CDI. Please share a picture.
|
Quote:
|
3 Attachment(s)
What do your mean CB200 or CG200? I think it is a CG200 on the second img you can see this screw in the middle of the engine. I'm right?
|
That is a CG based pushrod engine. The big giveaway is the big flathead cap on the cylinder body where the cam followers go, so yes you are right. You could call it a CG200 if you wanted to.
|
Can i buy spare parts for CG200 will work 100% to repair it or have i a problem?
|
You can find parts for the CG200 engine here. https://www.motopartsmax.com/index.p...92/tID/2/eID/7
You can also find parts on Ebay, Amazon and Aliexpress if you know what you are looking for. |
great thx. i will come with update when i strip down the engine and do some work.
Can someone tell my what i need for the first start. I dont have any electronic or somthing its all cut in twice : /. Need new 200cc CDI, Coil, Battery and complet wiring right? something more? Need I more thing for engine start? Thx a lot for all the help! |
are some CG200 repair manual available too?
|
Here's a link to the GC125-150. Basically all the same. Just different piston and cylinder size.
http://www.google.com/url?sa=t&rct=j...o0qsnnbW5KVmrI There are a few others available if you do a google search for Honda CG125 manual. |
Quote:
Quote:
Most chinese CG uses square CDi (as Kymco CK125) , some are round (as Honda CG) https://www.youtube.com/watch?v=lyhfqa3QP5k The basics are shown in http://www.sanxin.com.cn/Exhibit/exhview.asp?pid=5 . Jump some wires when need. If bike's alternator still OK ***AC-cdi*** battery is optional IF u can bump/ kickstart it manually. Quick fix for BAD source coil= swap to "DC-CDI" which needs battery & rectifier. |
Spark plug yeah : )
i will go with a AC-CDI (need then only Spark plug, Coil, AC-CDI right?) an try to kick first after see if the engine is OK. |
Quote:
I can supply parts if needed |
3 Attachment(s)
I take the time today to repair my 2 stroke 125 and then I have a bit of time free so I take all the pitbike apart. I need some more time for the engine. I'm not a mechanic so I need to learn on the way I do it :tup:
I see trough the engine and the air intake and the explosion camber didn't see wery well, was brown... But I need to see if it only dirty then I can clean it. So I want to do some mini-motard with slick tires and so. Do you think it is possible from this frame out or can I just forget it :)? I hace this 2 wire cables coming out. The big one from starter and the smaller from stator in the engine. |
So I want to do some mini-motard with slick tires, rear and front brake like a normal bike and something more. Do you think it is possible from this frame out or can I just forget it ?
Nobody can tell my something about this if its possible? |
All times are GMT -4. The time now is 08:26 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.