newbie and new to me
 

I just got a 2007 cool sports co200gy for 620 has 1900 miles the bike is in great shape never layed down I have to get a shift lever for it and get the rear blinkers fixed ( probably bulb)along with replace a front blinker cause its broken. I've read bout checking all the bolts and nuts on these anything else I should look for and where can I find the shift lever for my bike.

Welcome. A shift lever should be easy to find. Xr200 part likely fit.

I know it's the 163fml if it helps

I may have a shift lever in a box of parts. Will look this afternoon if I remember.

Welcome!

If you end up buying a shift lever, make sure it's spring loaded to protect the shifter shaft.

Can anyone send me a link of a shifter that'll fit cause I don't even know what original one looked like or does Iit not matter as long as its a 200cc

It matters if you have a shift linkage (which I doubt). If not, all Honda clones use the same shifter, AFAIK. It has a slight S-shape to it, which accomodates the fat stator cover, vs. the Honda XR200 shifter, which has a straight shifter.

I had a quick look on www.taobao.com, but I haven't found anything yet. Try searching under CB200.

I bet this one would be ideal: http://item.taobao.com/item.htm?spm=...id=20091016330

It is only $5.86 US plus shipping.

So something like this http://www.motoparts-superstore.com/...kart-2254.html cause I ordered one like this http://m.ebay.com/itm/300859823972?nav=SEARCH

Welcome; we are glad you joined us. :hi:

Also can anyone find a pic or tell me where the idle screw is I already bookmarked page for c clip but can't find one for idle and can anyone tell me where I can get a owners manual for the lifan 163fml for free in pdf

For parts, try Hooper Imports...they specialize in Lifan parts which in 2007 was pretty much the model from which seemingly many of these bikes were made from, or these companies manufactured bikes for Lifan under contract and also sold them under their own name ; i.e. HiBird.
Www.hooperimports.com

Also, because I have befriended them and they are a distributor with many Chinese contacts (besides just what they carry) is Excalibur Motorsports. www.atv4usa.com 909-591-8800 as well as a 1-800 number on their site somewhere...

Has anyone had to replace the bearings in the swing arm where bolt goes threw

I haven't done it on a China bike yet, but I have changed the swingarm bushings on a China ATV. I found Yamaha bushings that were a perfect fit, much better quality and around $7.00 each. For the Win!

Is it difficult to replace I'm not worried bout taking swing arm off just replacing them as I'd imagine there pressed in