ChinaRiders Forums

ChinaRiders Forums (http://www.chinariders.net/index.php)
-   Everything Else (http://www.chinariders.net/forumdisplay.php?f=125)
-   -   Kayo S200 carb upgrade recommendations (http://www.chinariders.net/showthread.php?t=33649)

skepticus 12-28-2023 03:58 PM

Kayo S200 carb upgrade recommendations
 
Hello Ladys and Gents,

I'm looking for a recommendation for a carb upgrade for a Kayo S200. It has a PZ30. I'm eyeing the NIBBI PE30.

Looking for recommendations the carb upgrade and a market place to source parts.

The stock carb is pretty much crap. Ran for 2 hours then went rich and bogs out. So something adjustable/tunable and rebuildable would be awesome!

Thanks!

JerryHawk250 12-28-2023 04:07 PM

If going with the Nibbi, you will need to go with the PE28. The PE28 is a smooth bore so it will flow about the same as the PZ30.

skepticus 12-28-2023 06:57 PM

Thanks for the info. Pls excuse my ignorance but I just assumed the number was in reference to the mm size.

XLsior 12-28-2023 07:38 PM

The PZ30 is a tapered bore with a choke plate so it basically its a restricted intake velocity.


The Nibbi being a smooth bore has less restriction which means greater air volume potential at a reduced velocity..


the issue being 200cc is not enough suck to make use of the PE30 smoothbore resulting in velocity drop and poor A/F tune.



the PE28 is still 'bigger' than the PZ30... even if the nominal exit hole diameter suggests otherwise.


at 300cc/20hp the PE30 starts to make sense.

skepticus 12-29-2023 09:53 AM

looking at 2 options now. any last minute suggestions/recommendations before i pull the trigger on one of these. pictures of the old carb and sxs below. actuall a "B PZ30". Thanks again!

https://www.amazon.com/JFG-RACING-Ca...1zcF9hdGY&th=1

https://www.amazon.com/dp/B0CBJB34FX...hlbWF0aWM&th=1

https://ibb.co/x5rSFsh
https://ibb.co/VCkfhYS
https://ibb.co/xM628MX
https://ibb.co/hyTRwSd
https://ibb.co/F6MZpvX
https://ibb.co/m0zdk0h

https://ibb.co/x5rSFsh
https://ibb.co/VCkfhYS
https://ibb.co/xM628MX
https://ibb.co/hyTRwSd
https://ibb.co/F6MZpvX
https://ibb.co/m0zdk0h

JerryHawk250 12-29-2023 10:27 AM

I would go with the Nibbi PE28FL. It will perform better than the PZ30. https://amzn.to/3RIMvEU

XLsior 12-29-2023 05:00 PM

Aliexpress Nibbi official store...



https://www.aliexpress.com/item/1005...06788.html?spm

skepticus 01-19-2024 02:42 PM

Holding off any upgrades until it gets a new factory carb. Turned it back into the shop since it's still under warranty. Maybe there'll be more info out about which carb upgrade is best in a few months.


All times are GMT -4. The time now is 01:32 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.