digital cluster problem
 

hey guys i know a lot of us have received our new clusters and I hooked mine up with no luck,the wires that connect to the back of the cluster must be loose.When i push on the back of them the cluster comes on,but no back light.Anyone else have or had this problem?

just hooked mine up the other day, its the connector into the back. peel back the boot and you'll see the connector. unplug it and re-seat it correctly all the way down. your troubles should be solved at that point. on another note, mine isn't sitting straight :/. BUT it is very VERY VERY nice to have a tach and a speedo that works and a nice display of the gear selector.

https://lh3.googleusercontent.com/vP...c=w260-h346-no

Use some washers and a longer left hand side screw to straighten the cluster up.

That's what I did.:tup:

thanks for the help guys headed to the garage now to try it.

Update problem fixed thanks for the help.

I've e-mailed the factory and gave them the heads up. Sorry for your troubles folks. As far as the mounting, a couple washes does the trick. Adding another bracket would take the price up more and it's a simple fix that only about 1/2 of them need anyways.....

Hawk Cluster
 

I added a few washers to level it out. my bolts were way long enough.

Looking good!