WTB: 56T rear sprocket - 428 - 4 bolt - JTR269
 

Hi Gang,
I know a lot of folks pull off the larger rear sprockets and put on smaller ones for better on-road gearing. I'm looking to do the opposite and make my enduro better geared for off-roading.

My 200 enduro has the 4 bolt rear sprocket... same as used on the Honda CB100/CB125. It's the 90mm bolt-to-bolt with 58mm center hub.

http://i42.photobucket.com/albums/e3...g?t=1432746572

It's a JTR 269 type... and I'm looking for a 56T version (might consider the 52T).
http://www.jtsprockets.com/catalogue/sprocket/JTR269/

If you have a good condition take-off laying around you'd like to sell... PM me.
Thanks!

I have a 50 tooth. what are you running on the front?

I found this in less than 2 minutes. ;)
https://www.amazon.com/JT-Sprockets-.../dp/B000GU1K8K

LOL, you beat me to it. Was looking up the link. :p

Winner winner, chicken dinner!

Thanks guys. I too have found them new... just seeing if anyone had one they swapped out and weren't using. Anything to save a buck... haha.

I'm currently running 17/46... which is great for the street. But got a bunch of mountain logging roads I want to explore. I have my original 15T front sprocket... and thought a nice big rear gear would give me better climbing power.

Cheers!

15/50 is nice and low. Way to low for me. I'll probably never put it back on the bike.

Toss that 15 tooth back on the front with your 46 rear and see how you like it. A 17/56 combo is pretty much the same ratio as a 15/50 set.