ChinaRiders Forums
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

ChinaRiders Forums (http://www.chinariders.net/index.php)
-   Web Deals - NEW! (http://www.chinariders.net/forumdisplay.php?f=134)
-   -   Hawk TT250 Exhaust $99.99 (http://www.chinariders.net/showthread.php?t=20165)

Musictrek 11-12-2017 12:51 AM
2 Attachment(s)
Quote:
Originally Posted by Musictrek (Post 269031)
Well I cant leave well enough alone. I modified the bracket and pipe and frame of the bike. All in to keep the clearance of the air box and to position the pipe near the original geometry of the OEM pipe. Cutting the stainless steel pipe was a risky move. It all worked out though. There's no going back now!
old pipe position and now new pipe position.

Musictrek 11-12-2017 12:58 AM
1 Attachment(s)
Quote:
Originally Posted by Musictrek (Post 269031)
Well I cant leave well enough alone. I modified the bracket and pipe and frame of the bike. All in to keep the clearance of the air box and to position the pipe near the original geometry of the OEM pipe. Cutting the stainless steel pipe was a risky move. It all worked out though. There's no going back now!
To get clearance for the pipe, I had to remove the old bolt position of the OEM pipe mount.

Musictrek 11-12-2017 01:12 AM
1 Attachment(s)
Quote:
Originally Posted by Musictrek (Post 269034)
old pipe position and now new pipe position.
old pipe

JerryHawk250 11-12-2017 07:14 AM
Nice job. I would done ther same. I'm OCD lol. Looks much better. :)

BlackBike 11-12-2017 09:52 AM
cant leave well enough alone. looks even better!!!

is that the xl size burrito tube or the regular (i believe there are 2 sizes). it looks like factory.

you're having too much fun :clap:

Musictrek 11-12-2017 10:08 AM
Quote:
Originally Posted by BlackBike (Post 269049)
cant leave well enough alone. looks even better!!!

is that the xl size burrito tube or the regular (i believe there are 2 sizes). it looks like factory.

you're having too much fun :clap:
Thank you! I'm not sure on the burrito. I followed someone on here who installed one and I ordered it a couple years ago I think.

Musictrek 11-12-2017 09:34 PM
1 Attachment(s)
Quote:
Originally Posted by JerryHawk250 (Post 269041)
Nice job. I would done ther same. I'm OCD lol. Looks much better. :)
Thank you! I think ill leave it alone for a week without any mods.:):) worked on it again today with the exhaust painting the brackets.

roundhouse 11-24-2017 06:41 PM
I got mine tuesday installed on my hawk today. Other than drilling the holes through the flange bigger it was easy. I only had a 3/8s drill bit and had to use the dremel to grind out the holes a bit. Everything else went on without a hitch. went with a 120 main jet and it feels a bit faster and sounds GREAT!!!!!!!!!!!!

JerryHawk250 12-16-2019 08:44 AM
Got a notification from Ebay this morning. $68.58. That's almost to good to pass up. https://www.ebay.com/itm/44cm-Alumin...YAAOSw~3paca4n

buzz 09-08-2021 10:24 PM
Hello Amazon has them for $65.00,and it fit perfect

Musictrek 09-11-2021 01:07 AM
Quote:
Originally Posted by buzz (Post 366010)
Hello Amazon has them for $65.00,and it fit perfect
thats a dam good price! I've since redone my blue Brozz 250 with the same pipe
https://radpaul.weebly.com/brozz-and-hawk-250.htmlhttps://radpaul.weebly.com/brozz-and-hawk-250.html

buzz 10-08-2021 06:10 PM
ebay $60.80 for 8 more hours,check it out. Its what i got for $65.00 , works great. perfect fix


All times are GMT -4. The time now is 02:01 AM.
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.