Apollo 250 wiring help

[Rcsup1]

Hi all I’m currently rewiring the bike to relocate some components. I’m going for a clean scrambler/cafe racer look. I started a couple of months ago and picked back up today. Now I have run into a snag. I have 2 wires that I have no idea we’re they go. I was really careful pulling everything apart so I am a bit
dumbfounded.

The two in question where tape some what close to the ignition switch. One is solid green the other green with a yellow stripe. They both splice off into several other wires.

[Rcsup1]

More pics

[pete]

solid green wire is normally an earth..



.

[Bruces]

Pete beat me to it ,green is generally ground and I don’t think anybody has posted a wiring diagram of the Apollo any chance there is anything in your owners manual ?

[Rcsup1]

I wish I have no manuals.

[humanbeing]

http://chinariders.net/showthread.php?p=229783#post229783
Bring the multimeter out. Use divides it into groups method & draw ur own wiring diagram.

[Its_not_a_honda]

Hard to tell from the pictures. Maybe the clutch safety switch wires? You know...the ones that make you pull the clutch in to start.

[Rcsup1]

Hard to tell from the pictures. Maybe the clutch safety switch wires? You know...the ones that make you pull the clutch in to start.

Yeah that was my first thought, but the ends of the wires are male connectors that slide into something and the clutch handle terminals are male not female.

Ok correction here the brake lever is a male connection. I changed all the levers and no longer have the factory clutch lever. If anyone can take a look and let me know I would greatly appreciated. I think that may be it.

[Rcsup1]

http://chinariders.net/showthread.php?p=229783#post229783
Bring the multimeter out. Use divides it into groups method & draw ur own wiring diagram.

Thank you for this!